Current site: Peikko Malaysia (English). Do you want to change country or language?
Europe
North America
Asia Pacific
- Australia
- Indonesia (English)
- Malaysia (English)
- Philippines (English)
- Singapore (English)
- Thailand (English)
- 中国
- 한국
Current site: Peikko Malaysia (English). Do you want to change country or language?
HPM® Rebar Anchor Bolts are utilized for anchoring concrete or steel structures and machinery into concrete base structures. This versatile anchor bolt range is well-suited for moderate loading conditions and has gained wide approval and adoption.
HPM® Rebar Anchor Bolts efficiently transfer tension, compression, and shear forces to the reinforced concrete base structure, such as foundations. These anchor bolts are compatible with HPKM® Column Shoes, SUMO® Wall Shoes, and can also be used for steel columns and machine fixings.
There are two types of anchors available: long anchors (type P), designed for splicing purposes, and short anchors (type L) with headed studs specifically intended for anchoring into foundations or in other applications where space is limited.
Long anchor bolts transmit compression and tension forces through the rib bond of ribbed bars, while short anchor bolts transfer these forces through a combination of headed studs and rib bond. PPL Anchor Bolt Installation Templates are provided to ensure the straightforward and accurate installation of anchor bolts in castings. The HPM® Rebar Anchor Bolt, as a steel component cast into concrete, is designed in compliance with Eurocodes or ACI 318M-11 standards.
Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Documents page, or from website of the country in question.
HPM® Rebar Anchor Bolt - ETA, Installation Instructions, 09/2022
ETA (HPM® L, 2024): ETA-02/0006 (en, de)
Czech Republic (HPM® P): 204/C6/2019/070-055681
Finland (HPM® P, HPM® L HDG/ECO): BY 5B - EC 2 n:o 88
Germany: Z-30.6-39
Hungary: A-744/2/2007
Hungary (HPM® P): A-5/2017
Netherlands: K65974/02
Poland (HPM® P): ITB-KOT-2021/1895
Romania: 001SC-01-324-2023
Slovakia (HPM® P): SK TP – 14/0099
Slovakia (HPM® P): SK04 – ZSV – 1987
Turkey: No. 802
Ukraine: UA.GS.2.34.001-22
U.K.: UKTA-0836-23/6938
The product has the country- or area-specific approvals mentioned above. Products under different approvals may differ from each other, for example, in the case of anchoring lengths.
Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Documents page, or from website of the country in question.
Anchor bolts are often used in various applications, from dry indoor conditions to harsh industrial conditions where additional protection against steel corrosion is needed. Anchor bolts are available with alternative protective coatings. Standard coating options for anchor bolts are described below. If other type of protection against corrosion is needed, please contact your local Peikko sales office for more information.
ECO Galvanizing
Peikko’s ECO Galvanizing is a cost-effective and ecological surface coating which allows anchor bolts to be galvanized partly or completely. The coating method is thermally sprayed zinc coating, according to EN ISO 2063. The minimum coating thickness is 100 µm, which corresponds to the performance of hot-dip galvanizing. The coating fulfils environmental class C3 of standard EN ISO 9223:2012. ECO Galvanizing is available for Anchor Bolt models HPM® 24 - 39 and PPM® 30 - 52.
Hot-Dip Galvanizing
Hot-Dip Galvanized (according to EN ISO 1461) anchor bolts are completely dipped into galvanized material. The method is suitable for HPM® and PPM® Anchor Bolts. The minimum coating thickness is 55 µm, which fulfils environmental class C3 of standard EN ISO 9223:2012.
Peikko Designer® helps you select the right Peikko product for your structure.
Use the available Peikko Designer® modules to design and select the optimal products to various kinds of structures and connections. You will always benefit from the latest features as the modules update automatically or are provided as online tools.
Peikko Designer® is free for registered users, and the online modules can be used even without registering.
Start using Peikko Designer® nowWe have created 2D and 3D detailing components for designers, including several 2D blocks, 3D custom components and connection plugins for different modelling applications. Choose the tools for your design software!
We have a selection of plugins available for Tekla users.
ProdLib add-ons for AutoCAD and Revit include libraries of Peikko's products to be placed into your designs.
Package includes Allplan fixtures and articles of Peikko's products to be placed into your designs.
